BENDING WITH TORSION OF FIBER REINFORCED CONCRETE BEAM OF CIRCULAR CROSS SECTION

Abstract

The article provides information about the tests of circle cross-section reinforced concrete beams made of high-strength steel-fiberconcrete on combined torsion and bending. Given information contains the main results: a diagram of the cracks with an indication of their opening width, the values of support reactions at the moment of cracking and at the moment before destruction. It was found that as the load is applied in beams made of high-strength steel-reinforced concrete, in the case of several cracks at the firststage, there is one crack increases. The beams are modeled in the design complex and given description of the main design parameters. The results of the calculation are presented and a comparative analysis of the results obtained with the experiments results. It is noted that the adopted models in the computational complexes require the development of subroutines and refinement