COMPRESSIVE CYLINDER STRENGTH AND DEFORMABILITY OF EXPANDED CLAY FIBER-REINFORCED CONCRETE WITH POLYPROPYLENE FIBER
COMPRESSIVE CYLINDER STRENGTH AND DEFORMABILITY OF EXPANDED CLAY FIBER-REINFORCED CONCRETE WITH POLYPROPYLENE FIBER
DOI:
https://doi.org/10.22337/2587-9618-2022-18-2-31-42Keywords:
lightweight concrete, expanded clay concrete, dispersed reinforcement, polypropylene fiber, compressive cylinder strength, compressive strain, stress-strain diagramAbstract
This article presents the experimental studies results of the reinforcement effect with polypropylene fiber (0.5 %, 1 %, and 1.5 %) on the strength (compressive cylinder strength) and deformation (compressive strain) characteristics for expanded clay concrete. The most effective fiber percentage is the content of 1.5 % by weight of the cement mass, based on obtained experimental results. An increase in the compressive cylinder strength (up to 13 %), a significant increase in the value of ultimate compressive strain in concrete (corresponding to the peak stress) of the stress-strain diagram (up to 50 %), and the plastic failure of expanded clay fiber-reinforced concrete is noted.
Downloads
Published
Issue
Section
License
Copyright (c) 2022 International Journal for Computational Civil and Structural Engineering

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
