Research article Vol. 15 No. 1 (2019): International Journal for Computational Civil and Structural Engineering

TO THE ASSESSMENT OF VERTICAL CRANE LOAD

Sergii Pichugin, Yulia Patenko
131-139 DOI 10.22337/2587-9618-2019-15-1-131-139 Published 2019-03-25
PDF
How to Cite

TO THE ASSESSMENT OF VERTICAL CRANE LOAD

Authors

  • Sergii Pichugin Poltava National Technical Yuri Kondratyuk University, Poltava, UKRAINE
  • Yulia Patenko Poltava National Technical Yuri Kondratyuk University, Poltava, UKRAINE

DOI:

https://doi.org/10.22337/2587-9618-2019-15-1-131-139

Keywords:

cranes loads, analytical model, numerical modeling, combination factor

Abstract

The problems of analytical and statistical modeling of the travelling cranes loads are carried out in the paper. The analytical model was expanded by the consideration of influence of the approach of cranes trolley, consideration of zero realization areas and crane impact zones which allowed to precise the statistical characteristics of the vertical crane loads. The numerical modeling which takes into account the accidental position of the crane bridge and position of the trolley on the crane bridge was used for the calculation the vertical crane loads from the four-wheel cranes. Comparison of the results showed that the design value of the vertical load per wheel is rarely realized. This fact should be used to clarify the crane load combination factors.

2137 482

Downloads

Published

2019-03-25

Issue

Vol. 15 No. 1 (2019): International Journal for Computational Civil and Structural Engineering

Section

Research article

How to Cite

Pichugin, S., & Patenko, Y. (2019). TO THE ASSESSMENT OF VERTICAL CRANE LOAD. International Journal for Computational Civil and Structural Engineering, 15(1), 131-139. https://doi.org/10.22337/2587-9618-2019-15-1-131-139

Keywords

cranes loads, analytical model, numerical modeling, combination factor

Most read articles by the same author(s)