Research article Vol. 18 No. 2 (2022): International Journal for Computational Civil and Structural Engineering

COMPRESSIVE CYLINDER STRENGTH AND DEFORMABILITY OF EXPANDED CLAY FIBER-REINFORCED CONCRETE WITH POLYPROPYLENE FIBER

PDF
How to Cite

COMPRESSIVE CYLINDER STRENGTH AND DEFORMABILITY OF EXPANDED CLAY FIBER-REINFORCED CONCRETE WITH POLYPROPYLENE FIBER

Authors

  • Yuliya Maskalkova Belarusian-Russian University, Mogilev, BELARUS
  • Valeryia Rzhevutskaya Belarusian-Russian University, Mogilev, BELARUS

DOI:

https://doi.org/10.22337/2587-9618-2022-18-2-31-42

Keywords:

lightweight concrete, expanded clay concrete, dispersed reinforcement, polypropylene fiber, compressive cylinder strength, compressive strain, stress-strain diagram

Abstract

This article presents the experimental studies results of the reinforcement effect with polypropylene fiber (0.5 %, 1 %, and 1.5 %) on the strength (compressive cylinder strength) and deformation (compressive strain) characteristics for expanded clay concrete. The most effective fiber percentage is the content of 1.5 % by weight of the cement mass, based on obtained experimental results. An increase in the compressive cylinder strength (up to 13 %), a significant increase in the value of ultimate compressive strain in concrete (corresponding to the peak stress) of the stress-strain diagram (up to 50 %), and the plastic failure of expanded clay fiber-reinforced concrete is noted.

1877 420

Downloads

Published

2022-06-24

How to Cite

Maskalkova, Y., & Rzhevutskaya, V. (2022). COMPRESSIVE CYLINDER STRENGTH AND DEFORMABILITY OF EXPANDED CLAY FIBER-REINFORCED CONCRETE WITH POLYPROPYLENE FIBER. International Journal for Computational Civil and Structural Engineering, 18(2), 31-42. https://doi.org/10.22337/2587-9618-2022-18-2-31-42

Keywords

lightweight concrete expanded clay concrete dispersed reinforcement polypropylene fiber compressive cylinder strength compressive strain stress-strain diagram

Most read articles by the same author(s)