APPLICATION OF COMPUTER SIMULATION IN THE EVALUATION OF THE STRESS-STRAIN STATE OF LOAD-BEARING STRUCTURES OF BUILDINGS MASONRY | International Journal for Computational Civil and Structural Engineering

PDF (Russian)

Published: 2017-03-22

DOI: https://doi.org/10.22337/2587-9618-2017-13-1-42-49

Keywords:

high-hollow ceramic products, Thermal calculation, finite element method, stress-deformability of the state , stone buildings , energy efficiency, the model.

Anatoliy I. Bedov

National Research Moscow State University of Civil Engineering, Moscow, RUSSIA

Azat I. Gabitov

Ufa State Petroleum Technological University, Ufa, RUSSIA

Azat A. Gallyamov

Ufa State Petroleum Technological University

Aleksandr S. Salov

Ufa State Petro-leum Technological University

Abstract

The results of studies on the analysis of the stress-strain state of the structures of bearing walls of high-hollow pottery. The way of modeling masonry finite element method. The experimental study of masonry structures produced in the Republic of Bashkortostan high-hollow pottery, set the nature of their work load, the mechanism of destruction. The results of the comparative evaluation of the calculations in the software package and the traditional “manual” calculation.

Downloads

Download data is not yet available.

Issue

Vol. 13 No. 1 (2017): International Journal for Computational Civil and Structural Engineering

Section

Articles

How to Cite

Bedov, A. I., Gabitov, A. I., Gallyamov, A. A., & Salov, A. S. (2017). APPLICATION OF COMPUTER SIMULATION IN THE EVALUATION OF THE STRESS-STRAIN STATE OF LOAD-BEARING STRUCTURES OF BUILDINGS MASONRY. International Journal for Computational Civil and Structural Engineering, 13(1), 42-49. https://doi.org/10.22337/2587-9618-2017-13-1-42-49

Similar Articles

Ivan Andrianov, Elena Chepurnova, Sergey Kostikov, MATHEMATICAL MODEL OF OPTIMIZATION OF THE TRANSPARENT PARTITION THICKNESS IN THE TROMBЕ WALL HEAT EXCHANGE SYSTEM , International Journal for Computational Civil and Structural Engineering: Vol. 22 No. 1 (2026): International Journal for Computational Civil and Structural Engineering
Nikita Tsimbelman, Anatoly Mirnyy, Evgeny Fedorenko, Dmitry Ivannikov, Valentin Babkin, Igor Kuzovatkin, Tatyana Chernova, NUMERICAL MODELING OF RETAINING STRUCTURES MADE OF BLOCKS WITH SOIL INFILL , International Journal for Computational Civil and Structural Engineering: Vol. 20 No. 4 (2024): International Journal for Computational Civil and Structural Engineering
Mikhail Lukin, Svetlana Roshchina, Anastasiya Lukina, Vladimir Rimshin, COMPUTER MODELING OF ENERGY-EFFICIENT JOINTS OF WOOD COMPOSITE PANELS , International Journal for Computational Civil and Structural Engineering: Vol. 20 No. 1 (2024): International Journal for Computational Civil and Structural Engineering
Alexander Treshchev, Dmitry Besstrashnov, A FINITE ELEMENT MODEL FOR CALCULATING A NON-THIN ORTHOTROPIC CYLINDRICAL SHELL, TAKING INTO ACCOUNT THE INDUCED INHOMOGENEITY , International Journal for Computational Civil and Structural Engineering: Vol. 20 No. 4 (2024): International Journal for Computational Civil and Structural Engineering
Yury Tyukalov, BULK THEORY ELASTICITY FINITE ELEMENT BASED ON PIECEWISE CONSTANT APPROXIMATIONS OF STRESSES , International Journal for Computational Civil and Structural Engineering: Vol. 19 No. 1 (2023): International Journal for Computational Civil and Structural Engineering
Aleksander Treshchev, Violetta Kuznetsova , STUDY OF THE INFLUENCE OF THE KINETICS OF HYDROGEN SATURATION ON THE STRESS-DEFORMED STATE OF A SPHERICAL SHELL MADE FROM TITANIUM ALLOY , International Journal for Computational Civil and Structural Engineering: Vol. 18 No. 2 (2022): International Journal for Computational Civil and Structural Engineering
Vladimir Agapov, Alexey Markovich, NONLINEAR ANALYSIS OF SOLID REINFORCED CONCRETE STRUCTURES WITH CRACKS , International Journal for Computational Civil and Structural Engineering: Vol. 19 No. 4 (2023): International Journal for Computational Civil and Structural Engineering
Vu Dinh Tho, Elena Korol, Vladimir Rimshin, Pham Tuan Anh, MODEL OF STRESS-STRAIN STATE OF THREE-LAYERED REINFORCED CONCRETE STRUCTURE BY THE FINITE ELEMENT METHODS , International Journal for Computational Civil and Structural Engineering: Vol. 18 No. 2 (2022): International Journal for Computational Civil and Structural Engineering
Maria S. Barabash, Anatol V. Pikul, Olga Bashynska, THE MODELING OF STRUCTURAL ENFORCEMENT BY COMPOSITE MATERIALS ON “LIRA-SAPR” , International Journal for Computational Civil and Structural Engineering: Vol. 13 No. 1 (2017): International Journal for Computational Civil and Structural Engineering
Vladimir Sidorov, Elena Badina, Roman Tsarev, DYNAMIC MODEL OF BEAM DEFORMATION WITH CONSIDER NONLOCAL IN TIME ELASTIC PROPERTIES OF THE MATERIAL , International Journal for Computational Civil and Structural Engineering: Vol. 18 No. 4 (2022): International Journal for Computational Civil and Structural Engineering

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)

Anatoliy I. Bedov, Aleksandr S. Salov, Azat I. Gabitov, Dmitriy М. Kuznetsov, Elza A. Sadykova, COMPUTER TECHNOLOGIES IN THE FORMATION OF COMPUTED MODELS OF MONOLITHIC REINFORCED CONCRETE STRUCTURES , International Journal for Computational Civil and Structural Engineering: Vol. 13 No. 4 (2017): International Journal for Computational Civil and Structural Engineering