DETERMINATION OF THE LIMIT HEIGHT OF THE COMPRESSED ZONE OF STEEL-CONCRETE COMPOSITE SECTIONS | International Journal for Computational Civil and Structural Engineering

PDF

Published: Jun 24, 2019

DOI: https://doi.org/10.22337/2587-9618-2019-15-2-72-76

Keywords:

concrete, steel, reinforced concrete, steel-concrete composite structure, height of compressed zone

Alexey Krylov

Research Center of Construction, Moscow, RUSSIA

Abstract

A brief review of power resistance of cross sections with a complex composition was made using the examples of steel-concrete composite structures. The features and difficulties that appear when calculate steel- concrete composite structures, materials of which have different strength characteristics, are noted. The procedure for calculation the limit height of the compressed zone for steel-concrete composite beam section is given.

Downloads

Download data is not yet available.

How to Cite

Krylov, A. (2019). DETERMINATION OF THE LIMIT HEIGHT OF THE COMPRESSED ZONE OF STEEL-CONCRETE COMPOSITE SECTIONS. International Journal for Computational Civil and Structural Engineering, 15(2), 72-76. https://doi.org/10.22337/2587-9618-2019-15-2-72-76

Issue

Vol. 15 No. 2 (2019): International Journal for Computational Civil and Structural Engineering

Section

Articles

Similar Articles

Vladimir Travush, Vladimir Kolchunov, Sergey Bulkin, Maxim Protchenko, DEFORMATION MODEL AND ALGORITHM FOR CALCULATION OF REINFORCED CONCRETE STRUCTURES OF ROUND CROSS-SECTION UNDER TORSION WITH BENDING , International Journal for Computational Civil and Structural Engineering: Vol. 18 No. 2 (2022): International Journal for Computational Civil and Structural Engineering
Denis Konin, THE COEFFICIENT OF LONGITUDINAL BENDING FOR COMPOSITE STEEL-CONCRETE RODS UNDER SHORT-TERM LOADS , International Journal for Computational Civil and Structural Engineering: Vol. 20 No. 2 (2024): International Journal for Computational Civil and Structural Engineering
Vladimir Travush, Petr Arleninov, Mikhail Desyatkin, Andrey Ivaschenko, Semen Kaprielov, Denis Konin, Alexey Krylov, Sergey Krylov, Igor Chilin, Andrey Sheinfeld, STATIC BEARING CAPACITY OF STEEL-PLATE COMPOSITE WALLS , International Journal for Computational Civil and Structural Engineering: Vol. 19 No. 4 (2023): International Journal for Computational Civil and Structural Engineering
Nam Vo Van, Tam Nguyen Trong, EVALUATE THE INFLUENCE OF CONCRETE STRENGTH ON THE LEVEL OF CORROSION OF STEEL REINFORCEMENT IN REINFORCED CONCRETE BEAM STRUCTURES, TAKING INTO ACCOUNT THE APPLIED LOAD , International Journal for Computational Civil and Structural Engineering: Vol. 20 No. 3 (2024): International Journal for Computational Civil and Structural Engineering
Pavel Khazov, Vladimir Erofeev, Olga Vediaikina, Artyom Pomazov, Dmitrij Kozhanov, ELASTOPLASTIC DEFORMATION OF STEEL CONCRETE BEAMS WITH LOCAL COMMISSION UNDER THREE-POINT BENDING , International Journal for Computational Civil and Structural Engineering: Vol. 20 No. 2 (2024): International Journal for Computational Civil and Structural Engineering
Nikolay Karpenko, Vladimir Kolchunov, Vitaly Kolchunov, Vladimir Travush, CALCULATION MODEL OF A COMPLEX-STRESSED REINFORCED CONCRETE ELEMENT UNDER TORSION WITH BENDING , International Journal for Computational Civil and Structural Engineering: Vol. 17 No. 1 (2021): International Journal for Computational Civil and Structural Engineering
Vladimir S. Utkin, Sergey A. Solovyev, RELIABILITY ANALYSIS OF REINFORCED CONCRETEELEMENTSWITH NORMAL CRACKS (ON RC BEAM EXAMPLE) , International Journal for Computational Civil and Structural Engineering: Vol. 14 No. 3 (2018): International Journal for Computational Civil and Structural Engineering
Oleg Kabantsev, Sergey Krylov, Sergey Trofimov, NUMERICAL ANALYSIS OF LONGITUDINAL REINFORCEMENT EFFECT ON RC SLAB PUNCHING SHEAR RESISTANCE BY STRENGTH AND CRACK PROPAGATION CRITERIA , International Journal for Computational Civil and Structural Engineering: Vol. 17 No. 1 (2021): International Journal for Computational Civil and Structural Engineering
Vladimir Kolchunov, Aleksey Demyanov, Николай Наумов, THE SECOND STAGE OF STRESSED-DEFORMED CONDITION OF REINFORCED CONCRETE STRUCTURES WHEN TURNING WITH BENDING (CASE 2) , International Journal for Computational Civil and Structural Engineering: Vol. 15 No. 4 (2019): International Journal for Computational Civil and Structural Engineering
Vladimir Kolchunov, Sergey Bulkin, CALCULATION SCHEME OF REINFORCED CONCRETE STRUCTURES OF CIRCULAR CROSS-SECTION UNDER BENDING WITH TORSION , International Journal for Computational Civil and Structural Engineering: Vol. 17 No. 3 (2021): International Journal for Computational Civil and Structural Engineering

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)

Alexey Krylov, ADHESION OF COMPONENTS OF COMPOSITE STEEL AND CONCRETE CROSS SECTION IN ANALYSIS OF BEAMS WITH CONCRETE ENCASED SECTIONS , International Journal for Computational Civil and Structural Engineering: Vol. 15 No. 2 (2019): International Journal for Computational Civil and Structural Engineering
Vladimir Travush, Petr Arleninov, Mikhail Desyatkin, Andrey Ivaschenko, Semen Kaprielov, Denis Konin, Alexey Krylov, Sergey Krylov, Igor Chilin, Andrey Sheinfeld, STATIC BEARING CAPACITY OF STEEL-PLATE COMPOSITE WALLS , International Journal for Computational Civil and Structural Engineering: Vol. 19 No. 4 (2023): International Journal for Computational Civil and Structural Engineering