Research article Vol. 14 No. 4 (2018): International Journal for Computational Civil and Structural Engineering

NATURE SIMILAR TECHNOLOGIES IN CONSTRUCTION INDUSTRY

Valery S. Lesovik, Lilia Kh. Zagorodnyuk, Evgeny S. Glagolev, Roman S. Feduk
98-108 DOI 10.22337/2587-9618-2018-14-4-98-108 Published 2018-12-21
PDF
How to Cite

NATURE SIMILAR TECHNOLOGIES IN CONSTRUCTION INDUSTRY

Authors

  • Valery S. Lesovik Belgorod State Technological University named after V.G. Shukhov, Belgorod, RUSSIA
  • Lilia Kh. Zagorodnyuk Belgorod State Technological University named after V.G. Shukhov, Belgorod, RUSSIA
  • Evgeny S. Glagolev Belgorod State Technological University named after V.G. Shukhov, Belgorod, RUSSIA
  • Roman S. Feduk Far Eastern Federal University, Vladivostok, RUSSIA

DOI:

https://doi.org/10.22337/2587-9618-2018-14-4-98-108

Keywords:

bionics, geonics (geomimetics), 3D technologies, additive technologies, composite gypsum binders,, mineral additive, construction composites

Abstract

In modern conditions it is necessary to create high-tech, reliable and durable composites of a new generation with the required properties, and this requires qualitatively new approaches in the design, synthesis, operation, destruction and reuse of sources, that is based on the introduction of fundamentally new nature-similiar technologies. The great interest not only in Russia, but also abroad, present additive technologies. The article proposes the technology of using water-resistant and cold-resistant quick-hardening composite on the basis of gypsum binders of a new generation with finely ground mineral additives of different genetic types, in-cluding using a new unique type of mineral additives - waste from the magnetic separation of ferruginous quartzite. бионика, геоника (геомиметика), 3D-технологии, аддитивные технологии, композиционные гипсовые вяжущие, минеральная добавка, строительные композиты

1748 397

Downloads

Published

2018-12-21

Issue

Vol. 14 No. 4 (2018): International Journal for Computational Civil and Structural Engineering

Section

Research article

How to Cite

Lesovik, V. S., Zagorodnyuk, L. K., Glagolev, E. S., & Feduk, R. S. (2018). NATURE SIMILAR TECHNOLOGIES IN CONSTRUCTION INDUSTRY. International Journal for Computational Civil and Structural Engineering, 14(4), 98-108. https://doi.org/10.22337/2587-9618-2018-14-4-98-108

Keywords

bionics, geonics (geomimetics), 3D technologies, additive technologies, composite gypsum binders, mineral additive, construction composites

Most read articles by the same author(s)