INFLUENCE OF SURFACE CRACKS ON THE STABILITY OF CRACKED SOIL SLOPE
Main Article Content
Abstract
The slope stability is a major concern to geotechnical engineers. Traditional methods of slope stability analysis have potentially ignored the influence of surface cracks. It is also known that seasonal rainfall and seepage through crack are closely related with slope failure. First, surface cracks provide special flow channels which increase the soil permeability and decrease the soil strength. Second, water-filled cracks apply an additional active force on the slope. Finally, cracks can create a part of the critical failure surface that has no shear strength. The objective of this paper is to investigate the influence of existing cracks on the stability of a cracked soil slope in different state. The effects of crack depth, slope angle and water-filled cracks on the stability of the cracked slope are explored. The analysis was conducted using the computer modelling programs Optum G2 to analysis of slope factor of safety. The results show that with increasing of slope angle the factor of safety decreases and this problem is significant in the slope with water filled cracks. Also, Factor of safety for all of slope angles in Dry and water filled cracks states with increasing the crack depth, decrease significantly.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
References
Bujang, B.K., Huat Faisal, H.J.A. & Low, T.H. (2006), Water infiltration characteristics of unsaturated soil slope and its effect on suction and stability. Geotechnical and Geological Engineering, 24, 1293–1306. DOI: https://doi.org/10.1007/s10706-005-1881-8
Gavin, K., & Xue, J. (2008), A simple method to analyze infiltration into unsaturated soil slopes. Computers and Geotechnics, 35, 223–230. DOI: https://doi.org/10.1016/j.compgeo.2007.04.002
Zhan, L. (2007), Soil-water interaction in unsaturated expansive soil slopes. Frontiers of Architecture and Civil Engineering in China, 1(2), 198-204. DOI: https://doi.org/10.1007/s11709-007-0023-1
Fu, H.Y., Hsun, P.C., Fa, J.C. & Haw, C.L. (2006), Instability of unsaturated soil slopes due to infiltration. International Symposium on Geohazards Mitigation, Taiwan.
Stephen, E.D., & Colin, R.R. (1994), Prediction of tension crack location and riverbank erosion hazards along destabilized channels. Earth surface processes and landforms, 19, 233-245. DOI: https://doi.org/10.1002/esp.3290190304
Cai, W.M., Murti, V., & Valliappan, S. (2005), Slope stability analysis using fracture mechanics approach. Theoretical and applied fracture Mechanics, 12, 261-281. DOI: https://doi.org/10.1016/0167-8442(90)90063-6
Fan, P., Liu, Q., Li, J., & Sun, J., P. (2005), Numerical analysis of rainfall infiltration in the slope with a fracture. Science in China Series E-Engineering & Materials Science, 48, 107-120.
Wang, Z. F. (2011), Unsaturated hydraulic properties of a single crack and its effects on slope stability. MPhil thesis. Harbin Institute of Technology, PRC.
Gui, MW. and Han, K.K. (2008), a case study on infiltration effect on the stability of two slopes. Landslides and Engineered Slopes, 1737 -1743. DOI: https://doi.org/10.1201/9780203885284-c239
Nurly, G., Lee, M.L., and Asof, M. (2006), Transient seepage and slope stability analysis for rainfall-induced landslide. A case study. Malaysian Jour. Civil Eng., 18 (1), 1-13.
Zeng, L., Liu, J., Zhang, J.H., Bian, H.B., Lu, W.H. (2018), Effect of colluvial soil slope fracture’s anisotropy characteristics on rainwater infiltration process. Adv. Civ. Eng. DOI: https://doi.org/10.1155/2018/7351628
Mukhlisin, M., Khiyon, K.N. (2018), the effects of cracking on slope stability. Geo Soc India, 91(6):704–710. DOI: https://doi.org/10.1007/s12594-018-0927-5
Zhang, G., Wang, R., Qian, J., Zhang, J.M., Qian, J. (2012), Effect study of cracks on behavior of soil slope under rainfall conditions. Soils Found, 52(4), 634–643. DOI: https://doi.org/10.1016/j.sandf.2012.07.005
Krabbenhoft, K., Lyamin, A., & Krabbenhoft, J. (2015), Optum computational engineering (OptumG2). [Computer software]. Retrieved from https: www.optumce.com
Ukritchon, B., and Keawsawasvong, S. (2019), Design equations of uplift capacity of circular piles in sands. Applied Ocean Research, 90, 101844. DOI: https://doi.org/10.1016/j.apor.2019.06.001
Nielsen, S.D. (2019), Finite element modeling of the tensile capacity of suction caissons in cohesion less soil. Applied Ocean Research, 90, 101866. DOI: https://doi.org/10.1016/j.apor.2019.101866
Daniel, M. (1999), Prediction of steady-state flow of real gases in randomly heterogeneous porous media. Physical D. Nonlinear Phenomena, 133(1-4), 463-468. DOI: https://doi.org/10.1016/S0167-2789(99)00078-0
Fredlund, D.G., and Rahardjo, H. (1993), Soil mechanics for unsaturated soils. New York: John Wiley & Sons. DOI: https://doi.org/10.1002/9780470172759
Spencer, E. (1967), A method of analysis of embankments assuming parallel interstice forces. Geotechnique, 17(1). DOI: https://doi.org/10.1680/geot.1967.17.1.11